Updated ETSI standard promises increased broadband capacity

ETSI Headquarters, Sophia Antipolis, France – 25 August 2009

A new version of a European Standard published recently by ETSI promises significantly increased broadband capacity to meet the ever-growing demands foreseen for European communications.

The latest version of the standard, which is known as ETSI Harmonized Standard EN 302 217-3 ('Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas'), was published at the end of July and adds new frequency bands to those specified in earlier versions of the document.

Microwave links are typically used for backhauling cellular radio networks such as UMTS, LTE and WiMAX as well as for private links for very high point-to-point data capacity, including Multi-gigabit Wireless LAN Extensions (MGWS-FLANE) applications. Given that such networks are evolving to provide greater and greater broadband access to end users, it is clear that the associated backbone networks have to accommodate massive increases in high speed data and voice transmissions. Most network operators use microwave links to support this demand. The availability of the frequency bands covered by this Harmonized Standard ensures that network operators will have enough backbone capacity to cope with the broadband demands for well into the future.

The standard now covers microwave links that operate in the frequency bands 57 to 59 GHz, 59 to 64 GHz, 64 to 66 GHz, 71 to 76 GHz and 81 to 86 GHz. Much of this is completely new spectrum, therefore providing genuinely additional capacity.

ETSI is responsible for the preparation of Harmonized Standards in support of the European Commission's Radio and Telecommunications Terminal Equipment (R&TTE) Directive (Directive 1999/5/EC). Harmonized Standards are a special class of European Standard, produced in response to 'Mandates' from the European Commission, that enable providers of equipment and services to demonstrate compliance with the requirements of the Directive, and thus be able to sell, deploy and operate them within the European Union. Specifically, this Harmonized Standard covers the provisions of article 3.2 of the Directive which concerns the efficient use of radio communications spectrum.

Under the terms of the Directive the frequency allocation authorities in each European member state are required to make the relevant spectrum available if they have not already done so. Frequency allocation in Europe is managed nationally but within a pan-European regulatory framework.

With the updated Harmonized Standard in place, operators may use the new spectrum as soon as it has been made available in the European member states. Equally, manufacturers wishing to put the relevant equipment on the market are able, if they so wish, to apply the Harmonized Standards route outlined in the R&TTE Directive, thus avoiding alternative, more complicated and more costly, ways of demonstrating compliance with the Directive.

Roberto Macchi, Chairman of the ETSI Working Group responsible for this standard, remarked:

'This Harmonized Standard has been developed as a very professional collaboration between manufacturers, network operators and regulators. It demonstrates that working on cutting edge technologies does not have to be difficult. The consequence of this latest version of the standard is to make broadband communications future-proof in a way that is endorsed by the European legal framework.
Very significantly, experts from Asia, America and Europe have worked together on this new version of ETSI EN 302 217-3, clearly indicating that its value extends way beyond Europe. Indeed, the existing global applicability of earlier versions of the standard continues to grow with this latest publication.'

The Harmonized Standard may be downloaded free of charge from: http://www.etsi.org/deliver/etsi_en/302200_302299/30221703/01.03.01_60/en_30221703v010301p.pdf 

[END]

Notes for Editors

About ETSI
ETSI produces globally-applicable standards for Information and Communications Technologies (ICT), including fixed, mobile, radio, converged, aeronautical, broadcast and internet technologies and is officially recognized by the European Commission as a European Standards Organization. ETSI is an independent, not-for-profit association whose 766 member companies and organizations, drawn from 63 countries across 5 continents worldwide, participate directly in its work.
For more information please visit: www.etsi.org  

The ETSI logo is a trademark of ETSI registered for the benefit of its Members.

For more information about ETSI Harmonized Standard EN 302 217-3, please contact: For general ETSI press enquiries

Martin Arndt

ETSI
Tel:  +33 4 92944249 
Email: [email protected]

Paul Reid,

Events & Communications 
ETSI
Tel:  +33 4 92944219  
Email: [email protected]